Kaiser VCP9005 Colour

Flagship in the Kaiser range, the VCP9005 is an ideal all round enlarger at an excellent price whether you are interested in enlarging colour or black and white, or both. This enlarger is a Diffuser type, but the the option to convert to Condenser type depending on your preference or type of work being undertaken.

- Colour enlarger for all film formats up to 6 x 9 cm (2.4 x 3.5 in.) and lenses up to 105 mm focal length.
- Compound negative carrier fitted with Anti-Newton glass on top and flat glass on bottom.
- Focusing with additional fine drive. Height adjustment with weight compensation by a roll-off spring mechanism.
- Filter holder for square filters and framed Multigrade® filters, can be swung out and adjusted in height, with diffusor plate for integral metering.
- Baseboard (WxDxH): approx. 600 x 500 x 32 mm (23.6 x 19.7 x 1.3 in.)

Specifications
Color mixing head with dichroic interference filters, calibrated in densitometric values up to 180. Dials are indirectly illuminated. Whitelight lever for simultaneous swinging in or out of filters, with control light. Continuously adjustable density aperture up to 60 densitometric densities (= two aperture settings). Best possible light distribution due to special diffusor plate and exchangeable double condensor system. UV and IR filters. Filter drawer. 

Removable compound negative carrier with interchangeable inserts, adjustable masking strips, adjustable film stops and grid pins. Lens stage with spirit level and red filter, tiltable for distortion correction on Scheimpflug principle. Quick change attachment for lenses. Height adjustment by hand-crank operated friction drive on plastic bearings. Wall and floor projection possible. 

Wide, vibration-resistant column of embossed aluminium tubing, with dull black anodized surface, cm and inch scales and markings for enlarging scales. Matt-gray laminated baseboard with individually height-adjustable feet. Spirit level on column base. 

Technical specifications:
Lamp: Halogen cold light mirror lamp, 12 V, 100 W, socket GZ 6,35
Cord: approx. 1,80 m (6 ft.)
Filter drawer: 85 x 85 mm (3.3 x 3.3 in.)
Column (HxWxD): approx. 1000 x 70 x 35 mm (39.4 x 2.8 x 1.4 in.)
Distance between optical axis and column base:  approx. 220 mm (8.7 in.)
Can be converted into a copy stand or a slide duplicator.
Supplied with compound negative carrier, lamp and dust hood

Supplied without lens (See our range of lenses in the Enlarging lens section) & transformer (option of stabilised to iron out any voltage fluctuations for consistancy or unstabilised) - See accessories section or add below.
(Replacement lamp: 4459)